Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › CRANKSHAFT POSITION SENSOR › 2012.03–2016.06
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297478 CRANKSHAFT POSITION SENSOR G

FA20 ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 11401G 1.INSPECT CRANKSHAFT POSITION SENSOR

a.
A280261E03
0.25,0.188 0.406,0.365 0.156,0.177 10 false *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1836 to 2244 Ω


Text in Illustration
*a Component without harness connected:
(Crankshaft Position Sensor)

If the resistance is not as specified, replace the crankshaft position sensor.