Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › KNOCK SENSOR
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297482 KNOCK SENSOR G

FA20 ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK SENSOR

a.
A280264E02
0.125,0.167 0.281,0.344 0.156,0.177 10 false *a

Measure the resistance according to the value(s) the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 532 to 588 kΩ


Text in Illustration
*a Component without harness connected
(Knock Sensor)

If the result is not as specified, replace the knock sensor.