Home › Engine / Hybrid System › FA20 (ENGINE CONTROL) › VACUUM SENSOR
RM2090E _51 Engine / Hybrid System _060665 FA20 ENGINE CONTROL _0297483 VACUUM SENSOR G

FA20 ENGINE CONTROL  VACUUM SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89420M 1.INSPECT MANIFOLD ABSOLUTE PRESSURE SENSOR

a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON with the engine off.


c.

Inspect the manifold absolute pressure sensor.

i.

Enter the following menus: Powertrain / Engine / Data List / Atmosphere Pressure.


ii.

Check the atmosphere pressure.

OK:

Almost the same as ambient pressure


HINT:
·

The standard atmospheric pressure is 101 kPa (1.03 kgf/cm2, 14.6 psi).

·

The atmospheric pressure decreases by 1 kPa (0.01 kgf/cm2, 0.1 psi) as the altitude increases by 100 m.

·

The atmospheric pressure varies depending on the weather.