Home › Engine / Hybrid System › FA20 (ENGINE MECHANICAL) › DRIVE BELT
RM2090E _51 Engine / Hybrid System _060666 FA20 ENGINE MECHANICAL _0297488 DRIVE BELT A

FA20 ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 17705 1.REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

a.
A283417

Loosen the hose clamp and disconnect the No. 2 ventilation hose.


b.
A283418

Disconnect the mass air flow meter connector.


c.

Disengage the clamp and separate the wire harness from the air cleaner cap.


d.
A283419

Loosen the 2 hose clamps.


e.
A283420

Remove the 3 bolts and the air cleaner cap with air cleaner hose.


Hide 27029 2.REMOVE GENERATOR COVER

a.
A276031

Remove the 2 bolts and generator cover.


Hide 27029A 3.REMOVE BELT GENERATOR COVER

A276032

a.

Disengage the 2 clamps and separate the wire harness from the belt generator cover.


b.

Remove the 2 bolts and belt generator cover.


Hide 16361A 4.REMOVE FAN AND GENERATOR V BELT

A316371E01
0.778,1.65 0.446,1.776 false 0.253,1.712 0.410,1.874 0.158,0.162 10 *1

a.

While turning the belt tensioner clockwise, align the holes and insert a 3 mm (0.118 in.) hexagon wrench into the holes to hold the belt tensioner.

Text in Illustration
*1 Hexagon Wrench

HINT:

The pulley bolt for the belt tensioner has a left-hand thread.



b.

Remove the fan and generator V belt from the belt tensioner.