Home › Engine / Hybrid System › FA20 (ENGINE MECHANICAL) › DRIVE BELT
RM2090E _51 Engine / Hybrid System _060666 FA20 ENGINE MECHANICAL _0297488 DRIVE BELT G

FA20 ENGINE MECHANICAL  DRIVE BELT  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16361A 1.INSPECT FAN AND GENERATOR V BELT

a.
A396854E01
1.333,0.146 1.646,0.344 0.313,0.198 10 false *a

Check the belt for wear, cracks or other signs of damage.

Text in Illustration
*a INCORRECT

If any of the following defects is found, replace the fan and generator V belt.

·

The belt is cracked.

·

The belt is worn out to the extent that the cords are exposed.

·

The belt has chunks missing from the ribs.



b.
B000540E33
0.563,0.313 0.729,0.51 0.167,0.198 10 false *a 2.24,0.313 2.406,0.479 0.167,0.167 10 false *b

Check that the belt fits properly in the ribbed grooves.

Text in Illustration
*a CORRECT
*b INCORRECT

HINT:

Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install the new fan and generator V belt.