Home › Engine / Hybrid System › FA20 (ENGINE MECHANICAL) › CYLINDER HEAD GASKET
RM2090E _51 Engine / Hybrid System _060666 FA20 ENGINE MECHANICAL _0297492 CYLINDER HEAD GASKET A

FA20 ENGINE MECHANICAL  CYLINDER HEAD GASKET  REMOVAL  


PROCEDURE

Hide 11103C 1.REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH

Hide 11101 2.REMOVE CYLINDER HEAD SUB-ASSEMBLY RH

a.
U146712E03
1.813,0.396 1.927,0.563 0.115,0.167 10 false 6 1.781,1.552 1.896,1.719 0.115,0.167 10 false 5 2.573,0.396 2.688,0.563 0.115,0.167 10 false 4 0.979,1.542 1.094,1.708 0.115,0.167 10 false 3 2.552,1.542 2.667,1.708 0.115,0.167 10 false 2 0.99,0.406 1.104,0.573 0.115,0.167 10 false 1

Loosen the 6 bolts in the order shown in the illustration.


b.

Lightly tap the cylinder head sub-assembly RH to separate it from the cylinder block (bank 1).


c.

Remove the cylinder head sub-assembly RH.

NOTICE:

Be careful not to scratch the mating surface of the cylinder head and cylinder block.



Hide 11115 3.REMOVE CYLINDER HEAD GASKET

a.

Remove the cylinder head gasket.


Hide 11104A 4.REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH

Hide 11102 5.REMOVE CYLINDER HEAD SUB-ASSEMBLY LH

a.
U146716E03
1.771,0.156 1.906,0.344 0.135,0.188 10 false 6 1.771,1.875 1.906,2.063 0.135,0.188 10 false 5 2.573,0.135 2.708,0.323 0.135,0.188 10 false 4 0.969,1.875 1.104,2.063 0.135,0.188 10 false 3 2.594,1.875 2.729,2.063 0.135,0.188 10 false 2 0.948,0.146 1.083,0.333 0.135,0.188 10 false 1

Loosen the 6 bolts in the order shown in the illustration.


b.

Lightly tap the cylinder head sub-assembly LH to separate it from the cylinder block (bank 2).


c.

Remove the cylinder head sub-assembly LH.

NOTICE:

Be careful not to scratch the mating surface of the cylinder head and cylinder block.



Hide 11116 6.REMOVE NO. 2 CYLINDER HEAD GASKET

a.

Remove the No. 2 cylinder head gasket.