Home › Engine / Hybrid System › FA20 FUEL › INJECTOR DRIVER
RM2090E _51 Engine / Hybrid System _060667 FA20 FUEL _0297503 INJECTOR DRIVER A

FA20 FUEL  INJECTOR DRIVER  INSTALLATION  


PROCEDURE

Hide 89871 1.INSTALL INJECTOR DRIVER

NOTICE:
·

Be careful not to drop or strike the injector driver.

·

The injector driver is grounded at the bolt and the nut. To ensure that it is grounded, clean all oil and foreign matter from the installation areas of the injector driver and engine before installing the injector driver.



a.

Install the injector driver with the 3 bolts.

Torque:
6.4 N*m (65 kgf*cm, 57 in.*lbf)


b.
A279731E03
2.476,0.494 2.645,0.650 0.169,0.157 10 *1 1.891,1.045 2.492,0.632 false

Connect the 4 connectors to the injector driver. Move the lock levers in the direction indicated by the arrow to lock the 3 connectors.

Text in Illustration
*1 Lock Lever
V100135

Lock with Connector
V100136

Normal Connector


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL