Home › Engine / Hybrid System › FA20 FUEL › FUEL PUMP(for High Pressure)
RM2090E _51 Engine / Hybrid System _060667 FA20 FUEL _0297505 FUEL PUMP(for High Pressure) G

FA20 FUEL  FUEL PUMP(for High Pressure)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 23100X 1.CHECK FUEL PUMP OPERATION

a.

Check fuel pressure.

i.

Connect the GTS to the DLC3.


ii.

Start the engine.


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure.


v.

Check that the fuel pressure fluctuates when the target fuel pressure changes.

HINT:

The target fuel pressure operation lowers the target fuel pressure by -12.5% or increases the target fuel pressure by 24.8%.


Standard:

Fuel pressure fluctuates in accordance with the GTS operation.


If the result is not as specified, replace the fuel pump or fuel pressure sensor.



b.

Check operating sound.

i.

Remove the injector cover (for bank 2).


ii.

Start the engine.


iii.
A281913

Using a sound scope, check the operating sound of the pump.

If no sound can be heard, check the fuel pump, wire harness and ECM.


iv.

Stop the engine.


v.

Reinstall the injector cover (for bank 2).