Home › Engine / Hybrid System › FA20 INTAKE / EXHAUST › CHAMBER
RM2090E _51 Engine / Hybrid System _060669 FA20 INTAKE / EXHAUST _0297516 CHAMBER A

FA20 INTAKE / EXHAUST  CHAMBER  INSTALLATION  


PROCEDURE

Hide 17764D 1.INSTALL CHAMBER ASSEMBLY

a.

Install the air cleaner duct to the chamber assembly with a hose clamp.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 17764 2.INSTALL AIR CLEANER DUCT

a.

Install the 2 bolts and the air cleaner duct with the chamber.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.

Install the air cleaner duct with a hose clamp.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 3.INSTALL HOSE

a.

Engage the 2 clamps and install the hose.


b.
A397813E01
1.979,1.406 2.302,1.854 true 0.854,0.042 1.167,0.24 0.313,0.198 10 false *a 0.75,1.917 1.063,2.115 0.313,0.198 10 false *a 2.354,1.865 2.667,2.063 0.313,0.198 10 false *1

A281074

Insert the hose in until its flange contacts that of the grommet.

Text in Illustration
*1 Grommet
*a Flange

NOTICE:
·

Do not convolute the grommet when insert the hose to the grommet.

·

Check the grommet from the vehicle interior side to verify that it is properly installed onto the body.




c.

Connect the hose.