Home › Engine / Hybrid System › FA20 COOLING › THERMOSTAT(for Engine Coolant)
RM2090E _51 Engine / Hybrid System _060670 FA20 COOLING _0297523 THERMOSTAT(for Engine Coolant) G

FA20 COOLING  THERMOSTAT(for Engine Coolant)  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

a.
A104285

Immerse the thermostat in water and then gradually heat the water.

HINT:

Hold the thermostat with a wire or the like, so that the thermostat does not come into contact with the bottom of the container.



b.

Check the valve opening temperature of the thermostat.

Standard valve opening temperature:

86 to 90 °C (187 to 194 °F)


HINT:

If the valve opening temperature is not as specified, replace the thermostat.



c.

Check the valve opening temperature.


d.
A282917E02
2.49,1.573 2.646,1.75 0.156,0.177 10 false *a

Check the valve lift.

Text in Illustration
*a Valve lift

Valve lift:

8.0 mm (0.315 in.) or more at 95 °C (203 °F)


HINT:

If the valve lift value is not as specified, replace the thermostat.



e.

When the temperature of the thermostat drops below 83 °C (181 °F), check that the valve is fully closed.

HINT:

If the valve is not fully closed, replace the thermostat.