Home › Engine / Hybrid System › FA20 COOLING › COOLING FAN MOTOR
RM2090E _51 Engine / Hybrid System _060670 FA20 COOLING _0297525 COOLING FAN MOTOR G

FA20 COOLING  COOLING FAN MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 16363 1.INSPECT COOLING FAN MOTOR

a.
A103699E14
0.083,0.094 0.302,0.281 0.219,0.188 10 false *a

Check that the motor operates smoothly when the battery is connected to the cooling fan motor connector.

Text in Illustration
*a Component without harness connected
(Cooling fan motor)

If the motor does not operate smoothly, replace the cooling fan motor.


b.

Measure the current while the motor is operating.

Standard Current:
Item Condition Specified Condition
Cooling fan motor 20°C (68°F) 7.4 to 11.4 A at 12 V


If the result is not as specified, replace the cooling fan motor.


Hide 16363A 2.INSPECT NO. 2 COOLING FAN MOTOR (w/ Air Conditioning System)

a.
A103699E14
0.083,0.094 0.302,0.281 0.219,0.188 10 false *a

Check that the motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.

Text in Illustration
*a Component without harness connected
(No. 2 cooling fan motor)

If the motor does not operate smoothly, replace the No. 2 cooling fan motor.


b.

Measure the current while the motor is operating.

Standard Current:
Item Condition Specified Condition
No. 2 cooling fan motor 20°C (68°F) 7.4 to 11.4 A at 12 V


If the result is not as specified, replace the No. 2 cooling fan motor.