Home › Engine / Hybrid System › FA20 STARTING › KEY INTER LOCK SYSTEM
RM2090E _51 Engine / Hybrid System _060672 FA20 STARTING _0297537 KEY INTER LOCK SYSTEM G

FA20 STARTING  KEY INTER LOCK SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. CHECK KEY INTER LOCK OPERATION

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and move the shift lever to any position other than P.


c.

Check that the ignition key cannot be turned to LOCK.


d.

Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed. If the operation cannot be done as specified, inspect the key inter lock circuit.