Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL MAIN SWITCH
RM2090E _51 Engine / Hybrid System _060673 CRUISE CONTROL _0297541 CRUISE CONTROL MAIN SWITCH G

CRUISE CONTROL  CRUISE CONTROL MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 84630 1.INSPECT CRUISE CONTROL MAIN SWITCH ASSEMBLY

a.

Measure the resistance according to the value(s) in the table below.

E361961E01
5.521,1.146 5.885,0.583 5.885,0.583 6.052,0.583 false 5.083,0.521 5.396,0.719 0.313,0.198 10 false *c 6.365,1.219 6.677,1.417 0.313,0.198 10 false *b 5.479,2.344 5.792,2.542 0.313,0.198 10 false *d 4.333,2.104 4.646,2.302 0.313,0.198 10 false *e 6.115,0.5 6.427,0.698 0.313,0.198 10 false *1 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a

Text in Illustration
*1 Cruise Control Main Switch Assembly (ON-OFF button) - -
*a Component without harness connected
(Cruise Control Main Switch Assembly)
*b ON-OFF
*c +/RES *d -/SET
*e CANCEL - -

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 3 Cruise control Main switch Assembly (ON-OFF button) released 1 MΩ or higher
Cruise control Main switch Assembly (ON-OFF button) pushed Below 2.5 Ω
+/RES switch ON 235 to 245 Ω
-/SET switch ON 617 to 643 Ω
CANCEL switch ON 1509 to 1571 Ω