Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › SPEED SENSOR
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297543 SPEED SENSOR G

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR  INSPECTION  


PROCEDURE

Hide 89413B 1.INSPECT TRANSMISSION REVOLUTION SENSOR (NT)

a.
C206284E04
0.056,0.003 0.296,0.205 0.240,0.202 10 *a 1.303,1.682 1.603,1.103 false 1.196,1.707 1.643,1.909 0.446,0.202 10 2 2.15,1.682 1.852,1.103 false 2.152,1.707 2.598,1.909 0.446,0.202 10 1

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Transmission Revolution Sensor (NT))

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 560 to 680 Ω


If the result is not as specified, replace the transmission revolution sensor (NT).


Hide 89413B 2.INSPECT TRANSMISSION REVOLUTION SENSOR (SP2)

a.
C206284E04
0.056,0.003 0.296,0.205 0.240,0.202 10 *a 1.303,1.682 1.603,1.103 false 1.196,1.707 1.643,1.909 0.446,0.202 10 2 2.15,1.682 1.852,1.103 false 2.152,1.707 2.598,1.909 0.446,0.202 10 1

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Transmission Revolution Sensor (SP2))

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 560 to 680 Ω


If the result is not as specified, replace the transmission revolution sensor (SP2).