Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › PATTERN SELECT SWITCH
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297550 PATTERN SELECT SWITCH G

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  PATTERN SELECT SWITCH  INSPECTION  


PROCEDURE

Hide 84720J 1.INSPECT PATTERN SELECT SWITCH ASSEMBLY

a.
C261041E01
0.166,0.111 0.327,0.295 0.160,0.183 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Pattern Select Switch Assembly)

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 - 8 Pattern select (SNOW) switch on Below 1 Ω
Pattern select (SNOW) switch off 10 kΩ or higher
4 - 8 Pattern select (SPORT) switch on Below 1 Ω
Pattern select (SPORT) switch off 10 kΩ or higher


If the result is not as specified, replace the pattern select switch assembly.