Home › Drivetrain › TX6A (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL PUMP
RM2090E _52 Drivetrain _060674 TX6A AUTOMATIC TRANSMISSION / TRANSAXLE _0297557 OIL PUMP G

TX6A AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  INSPECTION  


PROCEDURE

Hide 35370 1.INSPECT STATOR SHAFT ASSEMBLY

a.
C257589

Using a caliper gauge, measure the inside diameter of the stator shaft bushing.

Standard inside diameter:

21.527 mm (0.8475 in.)


If the inside diameter is more than the standard inside diameter, replace the stator shaft assembly.


Hide 2.INSPECT OIL PUMP DRIVE GEAR ROTATION

a.
C108581

Make sure that the drive gear rotates smoothly.


b.

Remove the oil pump assembly from the torque converter assembly.