35301B
1.REMOVE FRONT OIL PUMP BODY O-RING
Remove the front oil pump body O-ring from the oil pump assembly.
2.FIX OIL PUMP ASSEMBLY
Place the oil pump assembly on the torque converter assembly.
| *1 | Torque Converter Assembly |
35617
3.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 3 clutch drum oil seal rings.
35301A
4.REMOVE FRONT OIL PUMP OIL SEAL
Remove the oil pump assembly from the torque converter assembly.
Using a knife, cut through the oil seal lip.
| *1 | Protective Tape |
| *a | Cut Position |
Using a screwdriver with its tip taped, pry out the front oil pump oil seal.
Do not damage the bushing or oil pump body.
Tape the screwdriver tip before use.