Home › Drivetrain › CLUTCH › CLUTCH FLUID
RM2090E _52 Drivetrain _060675 CLUTCH _0297559 CLUTCH SYSTEM G

CLUTCH  CLUTCH SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT CLUTCH FLUID LEVEL

a.
C261641

Check the clutch fluid level.

If clutch fluid level is lower than the MIN line, check for leaks and inspect the clutch lines. If necessary, refill the master cylinder reservoir sub-assembly with clutch fluid to the MAX line after repair or replacement.

Fluid:

SAE J1703 or FMVSS No. 116 DOT 3


NOTICE:

When adjusting fluid amount using a dropper or the like, do not use one which was used with liquid petroleum, water, or deteriorated clutch fluid. This may deteriorate seals or fluid, resulting a fluid leak and poor clutch function.