1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
73900
2.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)
31410
3.DISCONNECT CLUTCH MASTER CYLINDER ASSEMBLY
Disconnect the 2 connectors.
Remove the clip and the clevis pin, and separate the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.
Remove the 2 nuts and separate the clutch master cylinder assembly from the clutch pedal support sub-assembly.
55107A
4.REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
Remove the bolt and the clutch pedal support sub-assembly.
84520
5.REMOVE CLUTCH START SWITCH ASSEMBLY
Disconnect the clamp.
Remove the nut and the clutch start switch assembly from the clutch pedal support sub-assembly.
88280A
6.REMOVE CLUTCH SWITCH ASSEMBLY
Remove the nut and the clutch switch assembly from the clutch pedal support sub-assembly.
31301A
7.REMOVE CLUTCH PEDAL SPRING
Remove the 2 E-rings and the 2 clevis pins.
Remove the assist rod A, assist rod B, clutch pedal spring and assist bush.
31301
8.REMOVE CLUTCH PEDAL SUB-ASSEMBLY
Remove the bolt, the nut and the clutch pedal sub-assembly from the clutch pedal support sub-assembly.
Turn the nut while holding the bolt.
31324A
9.REMOVE CLUTCH PEDAL SHAFT COLLAR
Remove the 2 clutch pedal bushes and the clutch pedal shaft collar from the clutch pedal sub-assembly.
31453B
10.REMOVE BUSH
Remove the 3 bushes.
31301B
11.REMOVE NO. 1 CLUTCH PEDAL CUSHION
Remove the 2 No. 1 clutch pedal cushions.
31301S
12.REMOVE NO. 2 CLUTCH PEDAL CUSHION
Remove the No. 2 clutch pedal cushion from the clutch pedal sub-assembly.
31321
13.REMOVE CLUTCH PEDAL PAD
Remove the clutch pedal pad from the clutch pedal sub-assembly.