Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER(for LHD)
RM2090E _52 Drivetrain _060675 CLUTCH _0297562 CLUTCH MASTER CYLINDER(for LHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for LHD)  REASSEMBLY  


PROCEDURE

Hide 31415B 1.INSTALL MASTER CYLINDER PISTON SUB-ASSEMBLY

C261657

a.

Apply lithium soap base glycol grease to the portions shown in the illustration.

Text in Illustration
V100135

Lithium Soap Base Glycol Grease


b.

Install the master cylinder piston sub-assembly and spring into the master cylinder body.


c.

Fix the clutch master cylinder assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



d.
C261656

Using snap ring pliers, install the snap ring while pushing the clutch master cylinder push rod.


Hide 31417 2.INSTALL CLUTCH RESERVOIR GROMMET

a.

Install the clutch reservoir grommet onto the master cylinder body.


Hide 47202 3.INSTALL MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Install the master cylinder reservoir sub-assembly to the master cylinder body.


b.

Using a pin punch and a hammer, tap in the straight pin.


c.

Install the master cylinder reservoir cap.