1.DRAIN CLUTCH FLUID
Immediately wash off any clutch fluid that comes into contact with any painted surfaces.
If any work is done on the clutch system or if air in the clutch lines is suspected, bleed the air from the system.
31486B
2.DISCONNECT MASTER CYLINDER TO RELEASE CYLINDER HOSE
Remove the union bolt, 2 gaskets and disconnect the master cylinder to release cylinder hose from the clutch release cylinder assembly.
Use a container to collect the fluid.
31470
3.REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY
Remove the 2 bolts and the clutch release cylinder assembly.