1.DRAIN MANUAL TRANSMISSION OIL
Remove the manual transmission filler plug and the gasket.
Remove the manual transmission drain plug and gasket, and then drain the manual transaxle oil.
Install a new gasket and the manual transmission drain plug.
2.ADD MANUAL TRANSMISSION OIL
Add manual transmission oil until the oil level is within 5 mm (0.197 in.) from the bottom of the manual transmission filler plug opening.
| *a | 0 to 5 mm (0 to 0.197 in.) |
API GL-3 or API GL-4
SAE 75W-90
2.2 liters (2.3 US qts, 1.9 Imp. qts)
Check for oil leakage when the oil level is low.
Install the transmission filler plug and a new gasket.
3.INSPECT FOR MANUAL TRANSMISSION OIL
4.INSPECT FOR MANUAL TRANSMISSION OIL LEAK