Home › Drivetrain › TL70 (MANUAL TRANSMISSION / TRANSAXLE) › NEUTRAL POSITION SWITCH
RM2090E _52 Drivetrain _060676 TL70 MANUAL TRANSMISSION / TRANSAXLE _0297571 NEUTRAL POSITION SWITCH G

TL70 MANUAL TRANSMISSION / TRANSAXLE  NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 1.INSPECT NEUTRAL POSITION SWITCH ASSEMBLY

a.
C251380E01
0.292,0.215 0.501,0.397 0.209,0.182 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pushed 10 kΩ or higher
1 - 2 Released Below 1 Ω


Text in Illustration
*a Component without harness connected
(Neutral Position Switch Assembly)

If the result is not as specified, replace the neutral position switch assembly.