Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM2090E _53 Suspension _060680 FRONT SUSPENSION _0297600 FRONT SHOCK ABSORBER N

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH

a.

Affix the front shock absorber assembly LH perpendicularly.


b.

Push the piston rod down approximately 70 mm (2.756 in.) by hand.


c.
C265376

Using a metal saw or the like, slowly cut a hole in the location shown in the illustration and let the gas out.

Text in Illustration
V100144

Area to Cut a Hole

NOTICE:
·

Wear protective glasses.

·

Since the discharging gas may cause chips to scatter, cover the metal saw with a piece of cloth when making the hole.



HINT:

The gas is colorless, odorless and non-poisonous.