Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER
RM2090E _53 Suspension _060680 FRONT SUSPENSION _0297600 FRONT SHOCK ABSORBER A

FRONT SUSPENSION  FRONT SHOCK ABSORBER  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

The procedure listed below is for the LH side.

·

Use the same procedure for the RH side and LH side.



PROCEDURE

Hide 48609E 1.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT LH

a.
C262319E02
2.292,1.448 2.792,1.198 false 2.854,1.104 3.406,1.521 0.552,0.417 10 false SST

Secure the SST in a vise.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)


b.
C263591

Attach the arm of SST to the diameter of the front coil spring LH.

CAUTION:
·

Make sure that the front coil spring LH is installed so that the distance between the upper and lower hooks of SST is at the maximum.

·

Make sure that the claws on the hooks are securely engaged.




c.

Using SST, compress the front coil spring LH.

CAUTION:
·

If the front coil spring LH bends during the compression, immediately stop the compression and reinstall SST.

·

Do not compress the spring until the front coil spring LH contact each other.

·

Do not use an impact wrench.




d.

Using a long socket hexagon wrench 6mm, fix the shock absorber rod.


e.
C257451E02
0.844,0.771 0.719,0.438 0.719,0.438 0.49,0.438 false 0.177,0.365 0.719,0.781 0.542,0.417 10 false SST

Confirm that the front coil spring LH becomes free and remove the lock nut.

SST
09729-97202  

CAUTION:

Do not remove the lock nut when the front coil spring LH is not free.


NOTICE:
·

Be careful not to damage or deform the threaded section.

·

Fully insert a long socket hexagon wrench 6mm.




Hide 48609 2.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH

a.

Remove the front suspension support sub-assembly LH.


Hide 48152 3.REMOVE FRONT SPRING SEAT

a.

Remove the front spring seat.


Hide 48331C 4.REMOVE FRONT SPRING BUMPER LH

a.

Remove the front spring bumper.


Hide 48157C 5.REMOVE FRONT COIL SPRING INSULATOR UPPER LH

a.

Remove the front coil spring upper insulator LH.


Hide 48331C 6.REMOVE FRONT SPRING BUMPER LH

a.

Remove the front spring bumper LH.


Hide 48132 7.REMOVE FRONT COIL SPRING LH

a.

Release the SST and remove the front coil spring LH.