Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM2090E _53 Suspension _060681 REAR SUSPENSION _0297605 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH

a.

Hold the rear shock absorber assembly LH perpendicularly.


b.

Push down the piston rod about 60 mm (2.362 in.) by hand.


c.
C265377

Using a metal saw or the like, slowly cut a hole in the location shown in the illustration and let the gas out.

Text in Illustration
V100144

Area to cut a hole

NOTICE:
·

Wear protective glasses.

·

Since the discharging gas may cause chips to scatter, cover the metal saw with a piece of cloth when making the hole.



HINT:

The gas is colorless, odorless and harmless.