Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM2090E _53 Suspension _060681 REAR SUSPENSION _0297605 REAR SHOCK ABSORBER A

REAR SUSPENSION  REAR SHOCK ABSORBER  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 48760C 1.REMOVE REAR SUPPORT TO REAR SHOCK ABSORBER NUT LH

a.
C256687E01
3.086,0.857 3.381,1.002 0.295,0.145 10 SST 3.067,0.935 2.848,1.016 false

Secure the SST in a vise.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)


b.
C263591

Set the arm hooks of SST on the middle line on the spring outer circumference.

CAUTION:
·

Install SST to the rear coil spring LH so that the distance between the upper and lower hooks is as wide as possible within the installation area.

·

Check that the claws of the hooks are attached securely.




c.

Using SST, compress the rear coil spring LH.

CAUTION:
·

During the work, if the rear coil spring LH is arched, immediately stop the work and reset SST.

·

Do not compress the spring until each coil contacts each other.

·

Do not use an impact wrench.




d.
C256688E02
1.75,0.771 0.813,0.563 true 0.479,0.469 0.771,0.615 0.292,0.146 10 false SST

After the rear coil spring LH becomes free of load, install SST to the rear support to rear shock absorber nut LH. And then, using a long socket hexagon 5 mm, hold the piston rod of the rear shock absorber assembly and remove the rear support to rear shock absorber nut LH.

SST
09729-18010  

CAUTION:

When the rear coil spring LH is still applied with load, do not remove the rear support to rear shock absorber nut LH.


NOTICE:
·

Be careful not to damage or deform the threads.

·

Securely set the long socket hexagon 5 mm.




Hide 48760B 2.REMOVE REAR SUSPENSION SUPPORT ASSEMBLY LH

a.

Remove the rear suspension support assembly LH from rear shock absorber assembly LH.


Hide 48482 3.REMOVE REAR UPPER SPRING SEAT LH

a.

Remove the rear upper spring seat LH from the rear suspension support assembly LH.


Hide 48231B 4.REMOVE REAR COIL SPRING LH

a.

Remove the rear coil spring from the rear shock absorber assembly LH. Release the SST and remove the rear coil spring.

CAUTION:

Do not use an impact wrench. It will damage.



Hide 48559D 5.REMOVE REAR NO. 1 SHOCK ABSORBER DUST COVER LH

a.

Remove the rear No. 1 shock absorber dust cover LH form the rear shock absorber assembly LH.


Hide 48341B 6.REMOVE REAR NO. 1 SPRING BUMPER LH

a.

Remove the rear No. 1 spring bumper LH from the rear shock absorber assembly LH.