The procedure listed below is for the LH side.
Use the same procedure for the RH and LH sides.
48725C
1.INSTALL REAR NO. 2 SUSPENSION ARM BUSHING
Using SST and a press, install a new rear No. 2 suspension arm bushing to the rear No. 2 suspension arm assembly LH.
|
Pressing direction |
48725B
2.INSTALL REAR NO. 1 SUSPENSION ARM BUSHING
Using SST and a press, install a new rear No. 1 suspension arm bushing to the rear No. 1 suspension arm assembly LH.
|
Pressing direction |