Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR
RM2090E _54 Brake _060684 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0297619 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

The procedures listed below are for the LH side.

·

Use the same procedures for the RH and LH sides.



PROCEDURE

Hide 89543 1.INSTALL FRONT SPEED SENSOR LH

a.

Install the front speed sensor LH with the bolt.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:

Do not allow any foreign matter such as dirt or dust to enter between the steering knuckle and the front disc brake dust cover.



b.

Connect the 6 front speed sensor clamps.

NOTICE:

Securely connect the connector.



Hide 53876A 2.INSTALL FRONT FENDER LINER LH

Hide 3.INSTALL FRONT WHEEL LH

Torque:
120 N*m (1224 kgf*cm, 89 ft.*lbf)