47101B
1.INSTALL BRAKE PEDAL BUSH
Install the 2 brake pedal bushes to the brake pedal.
| *1 | Brake Pedal Bush |
| *2 | Brake Pedal |
47124A
2.INSTALL BRAKE PEDAL SHAFT COLLAR
Apply a light layer of lithium soap base glycol grease to the entire circumference of the brake pedal return spring and the brake pedal shaft collar.
|
Lithium soap base glycol grease |
Install the brake pedal return spring and the brake pedal shaft collar to the brake pedal.
3.INSTALL BRAKE PEDAL
Install the brake pedal to the brake pedal bracket sub-assembly.
| *1 | Brake Pedal |
| *2 | Brake Pedal Support Assembly |
Install the bolt and nut to the brake pedal support assembly.
Hold the bolt in place and tighten the nut.
47121
4.INSTALL BRAKE PEDAL PAD
Install the brake pedal pad to the brake pedal.