Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM2090E _54 Brake _060685 BRAKE SYSTEM (OTHER) _0297628 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


TROUBLESHOOTING PRECAUTION



NOTICE:
·

Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.

·

When removing brake components, cover the brake line connections to prevent foreign matter, such as dust or dirt, from entering the lines.

·

Do not damage or deform the brake lines when removing or installing them.

·

Do not deform the bracket and the body when connecting a brake line and flexible hose.

·

When installing a brake tube grommet to the body, make sure that the brake line passes through the center of the grommet.

·

When installing a brake line or flexible hose, make sure that it is free from twists or bends.

·

If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake line to a plastic clamp, make sure that the brake line is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose or brake line.

·

After installing a brake line or flexible hose, make sure that it does not interfere with any other components.

·

Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface, immediately wash it off.

·
C259953E02
1.104,0.948 1.104,1.083 1.104,1.083 1.292,1.083 false 2.927,1.563 3.073,1.563 3.073,1.563 3.073,1.375 false 1.49,3.458 1.49,3.594 1.49,3.594 1.677,3.594 false 2.875,2.99 2.875,3.135 2.875,3.135 3.063,3.135 false 0.073,0.021 0.281,0.208 0.208,0.188 10 false *a 0.073,2.25 0.281,2.438 0.208,0.188 10 false *b 1.333,0.979 1.51,1.156 0.177,0.177 10 false *1 2.74,1.479 2.948,1.667 0.208,0.188 10 false *2 1.719,3.5 1.896,3.677 0.177,0.177 10 false *2 3.094,3.042 3.271,3.219 0.177,0.177 10 false *1

When disconnecting and connecting a flexible hose and brake line:

Text in Illustration
*1 Union Nut Wrench
*2 Clip
*a Disconnecting
*b Connecting

(a)

Hold the flexible hose with a wrench and disconnect the brake line with a union nut wrench without deforming the line.

(b)

Remove the clip.

(c)

Install a new clip.

(d)

Hold the flexible hose with a wrench and connect the brake line with a union nut wrench without deforming the line.


·
C259954

When connecting a brake line and way:

(a)

Support the way to prevent deformation of the brake tube and connect the brake tube to the way with a union nut wrench.

(b)

Support the way to prevent deformation of the brake tube and install the bolt to fix the way to the body.