Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE
RM2090E _54 Brake _060686 BRAKE (FRONT) _0297634 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RH and LH sides.

·

The procedure listed below is for LH side.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Immediately wash off any brake fluid that comes into contact with any painted surfaces.


Hide 47313A 3.REMOVE NO. 1 FRONT FLEXIBLE HOSE

a.
C256594

Remove the bolt and separate the No. 1 front flexible hose from the front shock absorber assembly.


b.
C256621

Remove the union bolt, 2 gaskets and No. 1 front flexible hose.


c.
C256622

Hold the No. 1 flexible hose with a wrench and disconnect the brake tube using a union nut wrench.

NOTICE:
·

Do not bend or damage the brake tube.

·

Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting position.




d.

Remove the clip.


e.

Remove the No. 1 front flexible hose.