Use the same procedure for RH and LH sides.
The procedure listed below is for LH side.
1.REMOVE REAR WHEEL
2.DRAIN BRAKE FLUID
47319F
3.REMOVE REAR LEFT FLEXIBLE HOSE
Remove the union bolt and 2 gaskets, and disconnect the rear left flexible hose from the rear disc brake cylinder LH.
| *A | Solid Disc Brake |
| *B | Ventilated Disc Brake |
Remove the bolt and separate the rear left flexible hose from the rear carrier LH.
Hold the rear left flexible hose with a wrench and disconnect the brake tube using a union nut wrench.
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting position.
Remove the clip.
Remove the rear left flexible hose.