Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM2090E _54 Brake _060688 PARKING BRAKE _0297641 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.

Check the resistance.

i.
C230989

Using an ohmmeter, measure the resistance between the terminals.

Text in Illustration
V100135

ON
V100136

OFF

Standard resistance:
Tester Connection Switch Condition Specified Condition
1 - Ground Released (ON) Below 1 Ω
1 - Ground Pushed in (OFF) 10 kΩ or higher


If the result is not as specified, replace the parking brake switch assembly.