Home › Steering › STEERING COLUMN › STEERING PAD SWITCH › from 2016.06
RM2090E _55 Steering _060690 STEERING COLUMN _0297648 STEERING PAD SWITCH A

STEERING COLUMN  STEERING PAD SWITCH  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing (See page).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least for 60 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

The power window system utilizes a mechanism that the door glass moves down slightly when the door is opened, and that the glass moves up when closing the door in order to prevent the door molding from being damaged. When the battery negative (-) terminal needs to be disconnected for servicing, fully open the driver and passenger door glasses in advance.


Hide 45130 3.REMOVE HORN BUTTON ASSEMBLY

Hide 84250A 4.REMOVE STEERING PAD SWITCH ASSEMBLY

a.

Disconnect the steering pad switch connector from the spiral cable sub-assembly.


b.
E356499

Remove the 2 guides.


c.
E356500

Remove the 2 screws.


d.

Disengage the 4 claws to remove the steering pad switch assembly.