Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM
RM2090E _57 Power Source / Network _060695 NETWORKING _0297666 LIN COMMUNICATION SYSTEM D

NETWORKING  LIN COMMUNICATION SYSTEM  SYSTEM DESCRIPTION  


LIN COMMUNICATION SYSTEM DESCRIPTION


The LIN communication system is used for the communication between the components in the tables below. If the communication cannot be performed through the LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.

HINT:
·

Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.

·

In the following table, "○" indicates that the function applies, and "-" indicates that it does not.



Door Bus Lines
Component Master Control LIN Communication DTC Output Function
Main Body ECU (Network Gateway ECU) ○ ○
Power Window Regulator Master Switch Assembly - -

Certification Bus Lines (w/ Entry and Start System)
Component Master Control LIN Communication DTC Output Function
Certification ECU (Smart Key ECU Assembly) ○ ○
Steering Lock Actuator Assembly - -
ID Code Box (Immobiliser Code ECU)* - -

* : w/ ID Code Box