Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM2090E _58 Vehicle Interior _060696 DOOR LOCK _0297675 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UN-LOCK WARNING SWITCH ASSEMBLY

B225713E07
1.791,4.268 1.942,4.417 0.151,0.148 10 *1 0.129,0.097 0.280,0.245 0.151,0.148 10 *a 1.202,3.946 1.722,4.305 false 1.138,2.035 1.554,2.225 0.416,0.190 10 UN- 1.88,2.035 2.296,2.225 0.416,0.190 10 UN+ 1.562,1.503 1.322,2.02 false 1.827,1.503 2.067,2.02 false

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the un-lock warning switch assembly.

Text in Illustration
*1 Pin
*a Component without harness connected
(Un-lock Warning Switch Assembly)