Home › Vehicle Interior › DOOR LOCK › LUGGAGE COMPARTMENT DOOR LOCK
RM2090E _58 Vehicle Interior _060696 DOOR LOCK _0297677 LUGGAGE COMPARTMENT DOOR LOCK G

DOOR LOCK  LUGGAGE COMPARTMENT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 64650 1.INSPECT LUGGAGE DOOR CLOSER ASSEMBLY

a.
B175598E06
1.25,0.375 1.604,0.208 true 0.927,0.385 0.313,0.281 true 2.375,1.219 2.333,1.458 false 2.781,1.188 2.885,1.427 false 2.552,1.208 2.552,1.448 false 0.104,0.156 0.26,0.302 0.156,0.146 10 false *b 1.646,0.094 1.792,0.24 0.146,0.146 10 false *c 2.5,0.406 2.823,0.656 0.323,0.25 10 false *a 2.844,1.469 3.052,1.646 0.208,0.177 10 false B 2.531,1.458 2.74,1.635 0.208,0.177 10 false E 2.229,1.458 2.438,1.635 0.208,0.177 10 false D+

Check the operation of the door lock motor.

i.

Move the door lock to the closed (lock) position.


ii.

Apply battery voltage to the door lock motor and check the operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1 (B)
Battery negative (-) → 2 (E)
Luggage compartment door lock motor open (unlock) operation


If the result is not as specified, replace the luggage door closer assembly.



b.

Check the operation of the door courtesy switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (E) - 3 (D+) Locked 10 kΩ or higher
2 (E) - 3 (D+) Unlocked Below 1 Ω


Text in Illustration
*a Component without harness connected
(Luggage Door Closer Assembly)
*b Lock
*c Open

If the result is not as specified, replace the luggage door closer assembly.