64719A
1.REMOVE LUGGAGE COMPARTMENT DOOR COVER (w/ Entry and Start System)
64650
2.REMOVE LUGGAGE DOOR CLOSER ASSEMBLY
Disconnect the connector.
Disengage the claw and open the cover.
| *1 | Cover |
Disconnect the luggage closer cable assembly.
| *1 | Luggage Closer Cable Assembly |
Remove the 2 bolts and the luggage door closer assembly.
69560A
3.REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/ Lock Cylinder)
Remove the 2 nuts and the luggage compartment door lock cylinder assembly.
Disconnect the luggage closer cable assembly.
| *1 | Luggage Closer Cable Assembly |
4.REMOVE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER PACKING (w/ Lock Cylinder)
Remove the luggage compartment door lock cylinder packing.
Do not reuse the removed packing. Be sure to install a new luggage compartment door lock cylinder packing to prevent water ingress.
| *1 | Luggage Compartment Door Lock Cylinder Packing |
64660
5.REMOVE LUGGAGE CLOSER CABLE ASSEMBLY (w/ Lock Cylinder)
Disengage the clamp and remove the luggage closer cable assembly.