Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM(w/ Entry and Start System)
RM2090E _58 Vehicle Interior _060697 THEFT DETERRENT / KEYLESS ENTRY _0297682 ENGINE IMMOBILISER SYSTEM(w/ Entry and Start System) T

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM(w/ Entry and Start System)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

If the problem only occurs in certain locations or at certain times of day, check for wave interference.

·

If the vehicle components are added, check for wave interference from the added components.



Engine Immobiliser System
Symptom Suspected Area See page
Engine cannot be started*1 Certification ECU (smart key ECU assembly) -
Engine cannot be started*2 ID code box (immobiliser code ECU)*1 (Click here)
ECM (Click here)
SFI system (Click here)
Power source mode cannot be changed*2 Engine switch (Click here)
Certification ECU (smart key ECU assembly) (Click here)
Steering lock lock/unlock not possible*3 Steering lock actuator assembly (steering lock ECU) (Click here)

*1: w/ ID Code Box

*2: Refer to Problem Symptoms Table for Entry and Start System (for Start Function) (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>PROBLEM SYMPTOMS TABLE).

*3: Refer to Problem Symptoms Table for Steering Lock System (See page Steering>STEERING COLUMN>STEERING LOCK SYSTEM>PROBLEM SYMPTOMS TABLE).