The main body ECU (network gateway ECU) stores this code if the main body ECU (network gateway ECU) reference code and the reference code from the combination meter do not match.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1401 | The main body ECU (network gateway ECU) reference code and reference code from the combination meter assembly do not match. | Combination meter assembly |
If the combination meter assembly is replaced, refer to Service Bulletin.
Check for DTCs (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENGINE IMMOBILISER SYSTEM(w/o Entry and Start System)>DTC CHECK / CLEAR).
DTC B1407 or B1408 is not output.
OK
NG
Register the recognition codes (Refer to Service Bulletin).
The recognition codes can be registered
OK
NG
DTC B1407 or B1408 is not output.
OK
NG