The main body ECU (network gateway ECU) stores this code when an internal malfunction is detected in the combination meter assembly.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1408 | Internal malfunction in the combination meter assembly. | Combination meter assembly |
If the combination meter assembly is replaced, refer to Service Bulletin.
Register the recognition codes (Refer to Service Bulletin).
NEXT
Check for DTCs (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENGINE IMMOBILISER SYSTEM(w/o Entry and Start System)>DTC CHECK / CLEAR).
DTC B1408 is not output.
OK
NG