Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM2090E _58 Vehicle Interior _060698 LIGHTING (INT) _0297691 VANITY LIGHT G

LIGHTING (INT)  VANITY LIGHT  INSPECTION  


PROCEDURE

Hide 74310 1.INSPECT VISOR ASSEMBLY

E235079E01
0.136,0.009 0.348,0.219 0.212,0.210 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance
Tester Connection Condition Specified Condition
1 - 2 Mirror cover close 10 kΩ or higher
1 - 2 Mirror cover open Below 1 Ω

If the result is not specified, replace the bulb or the visor assembly.

Text in Illustration
*a Component without harness connected
(Visor Assembly)