Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT
RM2090E _58 Vehicle Interior _060698 LIGHTING (INT) _0297692 PERSONAL LIGHT G

LIGHTING (INT)  PERSONAL LIGHT  INSPECTION  


PROCEDURE

Hide 81260A 1.INSPECT MAP LIGHT ASSEMBLY

E247992E01
0.16,0.149 0.357,0.346 0.198,0.198 10 *a 2.143,1.845 2.630,2.036 0.487,0.191 10 GND 1.571,1.845 2.059,2.036 0.487,0.191 10 +B 0.57,1.845 1.282,2.036 0.712,0.191 10 DOOR SW 1.713,1.324 1.713,1.816 false 1.111,1.818 1.487,1.326 false 1.936,1.321 2.311,1.808 false

a.

Check the map light assembly operation.

i.

Apply battery voltage to the terminals and check that the light comes on.

OK:
Condition Switch Condition Specified Condition
Battery positive (+) - 2 (+B)
Battery negative (-) - 1 (GND)
Map light switch ON Map light comes on
Battery positive (+) - 2 (+B)
Battery negative (-) - 3 (DOOR SW)
Map light switch DOOR Map light comes on

If the result is not specified, replace the map light bulb or map light assembly.

Text in Illustration
*a Component without harness connected
(Map Light Assembly)