Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
81230
1.REMOVE COURTESY LIGHT ASSEMBLY
Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
| *A | for LH Side |
| *B | for RH Side |
| *1 | Protective Tape |
Disconnect the connector and remove the courtesy light assembly.
81230B
2.REMOVE COURTESY LIGHT BULB
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the courtesy light cover.
| *1 | Protective Tape |
Remove the courtesy light bulb from the courtesy light body.