Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM2090E _58 Vehicle Interior _060698 LIGHTING (INT) _0297695 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 89783 1.INSPECT TRANSPONDER KEY AMPLIFIER

a.
E247991E01
0.179,0.126 0.395,0.389 0.216,0.263 10 *a 2.136,1.724 2.529,1.893 0.394,0.169 10 ILL+ 1.037,1.724 1.431,1.893 0.394,0.169 10 ILL- 1.323,1.236 1.174,1.685 false 2.114,1.236 2.264,1.685 false

Apply battery voltage to the connector and check the light comes on.

OK:
Condition Specified Condition
Battery positive (+) → 2 (ILL+)
Battery negative (-) → 6 (ILL-)
Light comes on


If the result is not as specified, replace the transponder key amplifier.

Text in Illustration
*a Component without harness connected
(Transponder Key Amplifier)