Home › Vehicle Interior › METER / GAUGE / DISPLAY › LIGHT CONTROL RHEOSTAT
RM2090E _58 Vehicle Interior _060699 METER / GAUGE / DISPLAY _0297699 LIGHT CONTROL RHEOSTAT A

METER / GAUGE / DISPLAY  LIGHT CONTROL RHEOSTAT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55606 2.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/o Knee Airbag)

a.
B312955

Remove the 2 screws.


b.
B312956

Disengage the 4 clips.


c.

Disengage the 4 claws and separate the No. 1 instrument panel under cover sub-assembly.


d.
B313000E01
0.477,0.102 0.675,0.280 0.198,0.179 10 *1 0.691,0.231 1.353,0.618 false

w/ Automatic Air Conditioning System for RHD:

i.

Disengage the guide and disconnect the aspirator hose.


ii.

Disconnect the connector.



e.

Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.

Text in Illustration
*1 Aspirator Hose


Hide 55606 3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)

a.
E252480

Remove the screw.


b.
E252481

Disengage the 6 clips.


c.

Disengage the 2 claws and separate the No. 1 instrument panel under cover sub-assembly.


d.

Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.


Hide 55449D 4.REMOVE SWITCH BASE

a.
E252482

Disengage the 4 claws and remove the switch base.


Hide 84119 5.REMOVE LIGHT CONTROL RHEOSTAT

a.
E252483

Disengage the 2 claws to remove the light control rheostat.