Home › Vehicle Interior › METER / GAUGE / DISPLAY › TRIP SWITCH
RM2090E _58 Vehicle Interior _060699 METER / GAUGE / DISPLAY _0297700 TRIP SWITCH G

METER / GAUGE / DISPLAY  TRIP SWITCH  INSPECTION  


PROCEDURE

Hide 84975 1.INSPECT TRIP SWITCH

E251568E02
1.906,2.552 1.833,3.021 true 2.042,2.552 2.208,3.021 true 1.365,2.573 1.24,3.042 true 0.198,0.104 0.448,0.417 0.25,0.313 10 false *a 2.167,3.052 2.563,3.25 0.396,0.198 10 false TRIP 1.083,3.063 1.479,3.26 0.396,0.198 10 false CS 1.667,3.063 2.063,3.26 0.396,0.198 10 false DISP

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (TRIP) - 1 Trip switch off 10 kΩ or higher
Trip switch on Below 1 Ω
3 (DISP) - 1 Display switch off 10 kΩ or higher
Display switch on Below 1 Ω
8 (CS) - 1 Unit switch off 10 kΩ or higher
Unit switch on Below 1 Ω


Text in Illustration
*a Component without harness connected
(Trip Switch)