Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM2090E _58 Vehicle Interior _060699 METER / GAUGE / DISPLAY _0297701 METER / GAUGE SYSTEM A

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE METER / GAUGE SYSTEM

a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Combination Meter / Warning.


v.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



Warning
Tester Display Default Content Setting Relevant ECU
Key Remind Sound NORMAL Function to change the frequency of the key reminder buzzer. NORMAL, FAST or SLOW Combination meter assembly
Tail Remind Buzzer ON Function to change the Tail Remind Buzzer. ON or OFF Combination meter assembly
Driver Side Seatbelt Warning Buzzer* ON Function to turn on/off the seat belt warning buzzer ON or OFF Combination meter assembly
Front Passenger Side Seatbelt Warning Buzzer* ON Function to change the seat-belt warning buzzer. ON or OFF Combination meter assembly

*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more



vi.

Connect the GTS to the DLC3.


vii.

Turn the ignition switch to ON.


viii.

Turn the GTS on.


ix.

Enter the following menus: Customize Setting / Combination Meter / Air Conditioner.


x.

Select the setting by referring to the table below.

NOTICE:

Be sure to record the current value before customizing.



Air Conditioner
Tester Display Default Content Setting Relevant ECU
Ambient Temperature Adjustment 0C (0F) Function to change the display temperature to match the actual temperature. +3C (+5.4F) +2C (+3.6F), +1C (+1.8F), 0C (0F), -1C (-1.8F), -2C (-3.6F) or 3C (-5.4F) Combination meter assembly