Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF SWITCH
RM2090E _58 Vehicle Interior _060701 SUPPLEMENTAL RESTRAINT SYSTEMS _0297717 AIRBAG CUT-OFF SWITCH G

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG CUT-OFF SWITCH  INSPECTION  


PROCEDURE

Hide 69065A 1.INSPECT AIRBAG CUTOFF SWITCH CYLINDER SUB-ASSEMBLY

a.
B311951E01
0.144,0.114 0.330,0.275 0.186,0.161 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Airbag Cutoff Switch Cylinder Sub-assembly)

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Off 400 Ω
On 100 Ω


If the result is not as specified, replace the airbag cutoff switch cylinder.